Product Description

Features:

1. Material: 6063 T5 or T6 aluminium alloy


2. Surface treatment & color:
 a) Powder coated: whiteblueyellowbrown
 b) Anodized & electrophoresis: silverchampagnebronzeblack
 c) Matt electro-deposition: silvergreygoldenblack
 d) Wood transfer: oakwillowteakyellow pearwalnut
 e) PVDF whitegreybrownblack
 f) Polish & brush: silverchampagnebronzegolden


3. Profile thickness: 1.0 ~ 2.0mm

4. Glass: Singledouble or triple glass; heat reflect & coating glasslaminated glass; low-e glass; louver glass

5. Application: Real estimatevillashotelschoolhospital et

6.Product name: Aluminum lift and slide door

Product Info

Minorder 1

Product Detail

Hot sales aluminum lift and slide door
Specification:

 
Aluminium alloy 6063 T5 or T6 aluminium alloy
Thickness Mostly from 1.0 ~ 2.0 mm
Surface treatment & color a) Anodized & electrophoresis: silver、champagne、golden、bronze、brown、black
b) Matt electro-deposition: golden、grey、silver、black
c)Powder coated:
white、blue、yellow、brown or customized
d) Wood transfer:
oak、wilow、teak、yellow pear、walnut or customized
e) PVDF double or triple coating: white、grey、brown、black or customized
f) Polish & brush:
silver、champagne、bronze、golden
Glass Single、double or triple glass; heat reflect & coating glass;laminate glass; low-e glass; louver glass
Factory capacity:  Monthly output about 3000 square meter; Max monthly capacity about 5000 tons.
Aluminum frame mechanical characteristic (6063-T5) Vickers hardness (HV)≥58
Webster hardness (HW)≥8
Tensile strength: no less than 160 N/mm²
Anodizing surface characteristic Average thickness of anodize film: no less than 10 μm
Partial thickness of anodize film: no less than 8 μm
Anodize sealing quality: no less than 30 mg/dm²
Hardness (Pential scratch testing): ≥ 3H
CASS test (24h):≥ 9 grade
Alkali resistance(24h):no less than 9 grade
Wear resistance(sand drop testing): ≥300 g/μm
Powder coated surface  characteristic Coating indentation hardness: ≥ 80
Coating thickness: 60 ~ 120 μm
Smallest local thickness: > 40 μm
adhension (dry、wet、boiling water): 0 grade
Wear resistance(sand drop testing): ≥0.8 L/μm
Hydrochloric Acid resistance: no blistering and obvious change
Solvent resistance: ≥ 3 grade
Detergent resistance: no blistering, no loss of film adhension and obvious change
Mortar resistance: no loss of film adhension and no visual change in appearance
Boiling water resistance: no air bubble、 wrinkle、cracks、falls off and color change on test specimen
Lead time About 30 days                                          (aluminium、glass and accessories production about 15 days;  window and door fabrication about 13 days, packing about 2 days)

Packing:
 
EPE form packing:
1) Each item corner protected by paper or form,
2) Each item wrap by EPE form and shrink film or thick paper
3) Numbers of item pack by wooden case (optional)


 

Products Categorys

Recommend Products

Navigation